The FX controls give continuous
adjustment of the post fader level
sent from the input channel to the
FX busses. The level adjustment
is from + 10dB to off with 0dB
at the centre position of the rota-
ry control.
The MON controls give conti-
nuous adjustment of the pre- fa-
der and pre- equaliser signal sent
from the input channel to the
MON busses. The level adjust-
ment is from + 10dB to off with
0dB at the centre position of the
rotary control.
The AUX controls give conti-
nuous adjustment of the level
sent from the input channel to the
AUX busses. The level adjust-
ment is from + 10dB to off with
0dB at the centre position of the
rotary control.
AUX1 and 2 can be configured
globally for pre- or post-fader
operation by pressing the
PRE/POST switch on the appro-
priate AUX-rail in the master
section.
The PAN controls the channel
placement within the master ste-
reo- or group mix and has a con-
stant power law. i.e. - 3dB at the
centre position and 0dB or off at
either extreme setting.
The MUTE switch mutes the in-
put channel at all points after the
insert send, including all auxili-
ary sends.
8
Kommentare zu diesen Handbüchern